Tag Archives: Slope correctors

VersiJack Pavers Make a Residence Shine

Email this to someoneShare on FacebookTweet about this on TwitterShare on Google+

Our pedestals are usually specified for commercial installations, yet sometimes we also have the perfect solutions for residential projects. In Bellingham, Washington, we were specified by Molly Maguire Landscape Architecture for a private residence. The owners wanted to build a deck for a few reasons 1) they wanted to have a deck to enjoy for parties, daily living and also relaxing, and 2) to raise the deck and conceal the unsightly concrete with a more polished look.

pedestals-5
VersiJack Pedestals shown during installation beneath the pavers. Photo courtesy of John Sweeney, Northwest Rain Solutions

Molly Maquire worked with Northwest Rain Solutions on the installation. Contractors from Northwest Rain Solutions used our VersiJack Adjustable Deck Pedestals, which are twist-to-adjust height pedestals, needed to accommodate this project for heights from 4-7/8″ to 7-7/8″. The pedestals create a broad, stable base that can support more weight than any other pedestal system. Due to unevenness and slope of the deck base, they required our Platform Slope Correctors which can correct from 0% to 5% slope at 1% increments. Because this type of corrector sits on top of the pedestal, it is faster and easier to adjust to the correct slope, as well as being less expensive than a bottom slope corrector.

The contractors also installed our Paver Spacer Tabs to provide the same exact distance between each of the pavers that were laid atop the VersiJack pedestals. To stabilize the pavers on the concrete, Neoprene shims were placed under the pedestals for fine tuned leveling and cushioning.  Alongside the pavers on the deck, Molly Maquire also designed a green roof with low succulents to accent the level of the deck, which can almost be viewed as a deck lawn.

pedestals-2
Completed deck with VersiJack Support Pedestals beneath. Photo courtesy of John Sweeney, Northwest Rain Solutions

The project was challenged by the wet, rainy weather of the northwest but the installation was fairly straightforward and looks wonderful!

Thermally Modified Wood at McMullen Museum of Art

Email this to someoneShare on FacebookTweet about this on TwitterShare on Google+

Have you ever seen a piece of art that stops you in your tracks? Sometimes a peaceful feeling washes over you, or maybe you’re drawn to a memory of another place or experience. Per Pablo Picasso, “Art washes away from the soul the dust of everyday life,” and I tend to agree. Speaking of art, the McMullen Museum of Art at Boston College, houses amazing works of art and also offers distinctive exhibitions, gallery talks and other events which bring the public to the museum.

mcmullen01
McMullen Museum of Art, Boston College

Last fall, the McMullen Museum of Art moved to a new location on the university’s Brighton Campus located in the former residence of Boston’s Cardinal Archbishop. The building, originally designed by Boston architects Maginnis and Walsh, was built in 1927 in the Roman Renaissance Revival Style. Modern architects DiMella Shaffer Associates out of Boston, collaborated with landscape architects from Carol R. Johnson Associates (CRJA) on the redesign.

IMG_0735
Side Balcony

For the remodel, CRJA specified Tournesol Siteworks’ products for a beautiful new 7’W x 20’L balcony and a 1,400 sq.ft amenity deck. Consigli Construction Co., out of Milford, MA, completed the installation. CRJA specified our Boulevard Structural Wood Tiles along with our Sliding Wood Tile Fasteners to connect the tiles in place. The wood tiles are 24″ x 24″ and are produced from Boulevard thermally-modified wood which goes through a process that changes the chemical make-up and cell structure of the wood. The process creates lumber with exceptional resistance to rot, pest, and decay. Technically, it shares a 25-year preserved-wood-like durability level similar to South American hardwoods, but is ecologically-friendly.

The thermal-modification process also prevents moisture absorption (which is great for Boston’s winter weather) and makes Boulevard wood resistant to warp, twist and other movement. Over time, weathering will reveal the wood’s natural patina to a silver, grayish color.

IMG_0733
Amenity Deck

Along with our wood tiles, they selected our VersiJack support pedestals in various sizes. VersiJack are twist-to-adjust height pedestals, needed to accommodate this project for heights from 1-1/2″ up to 11″. The pedestals create a broad, stable base that can support more weight than any other pedestal system. Due to unevenness and slope of the deck base, they required our Platform Slope Correctors which can correct from 0% to 5% slope at 1% increments. Because this type of corrector sits on top of the pedestal, it is faster and easier to adjust to the correct slope, as well as being less expensive than a bottom slope corrector.

IMG_0725crop
VersiJack Adjustable Pedestals

This installation also required our low-raised decking product,  SpiraPave Adjustable Deck & Paver Support Jacks. This raised podium floor allows for rapid drainage, concealed services below, and reduced the installation cost compared to any other material.

We were excited to be part of the McMullen Museum of Art’s historic transformation and relocation – congratulations on their new digs!

Custom Hearth Warms the Northwest

Email this to someoneShare on FacebookTweet about this on TwitterShare on Google+

Lately, the northwest has been jumping with projects and installations! Tournesol Siteworks has been involved with quite a few; one in particular is in Seattle’s South Lake Union district. This is a happening neighborhood near the Amazon campus that is full of commercial properties. The Radius, new apartments at 400 Boren Street, is a seven-story complex with over 280 units, and runs half of a city block at 43, 200 square feet. With more apartments now, the area is the epitome of the live, work, play Seattle lifestyle.

IMG_0098

Architecture and landscape architectural firm Weber Thompson, from Seattle, WA, created an amazing building containing private spaces, upper level terraces, large windows and an “E” shape design to the back of the building allowing light and air flow. On the rooftop and amenity decks on the third, eighth and ninth floors, Weber Thompson specified our Wilshire Collection  Fiberglass FRP round, square and rectangular shaped pots and planters in various dimensions. Weber also specified square and round lightweight GFRC Downtown Collection pots on the eighth and ninth floor amenity decks, installed by Compass Construction, Kirkland, WA.

IMG_0099

For the rooftop on the 9th floor, we engineered a custom hearth in lightweight GFRC per design specifications (as you can see in the photo above). Dimensions of the custom hearth are massive at 130″L x 64″W x 20″T, with 72″L x 25.25″W x 8.5″T recess in the center, including six 2″ x 12″ air intake. The center of the burner recess is hollow, so they used our adjustable VersiJack support pedestals and VersiJack Base Slope Correctors for easy access to conduit and electrical equipment, and to conceal these services below the hearth. The VersiJack pedestal‘s broad, stable base can support more weight than any other pedestal system.

On the ground floor, near the main entrance to the building, Weber Thompson wanted to plant a tree but didn’t want to exceed certain height limits, due to the windows, and the soil depth needed for the tree roots. Their solution was to place our Wilshire round planter inside a cast-in-place concrete planter (as shown in the photo above) to allow the tree’s soil depth to increase yet not exceed the window height requirements.

Weber Thompson created a wonderful structure on this architectural and landscape design project and we were happy to be involved. The neighborhood is booming and the beauty of this project speaks for itself.