Tag Archives: Boulevard Wood

Thermally-Modified Boulevard Wood Deck at Jefferson Platinum Triangle

Email this to someoneShare on FacebookTweet about this on TwitterShare on Google+

Beauty is not only on the surface, but also what’s beneath. We find this is true at the Jefferson Platinum Triangle apartments, in the center of the Platinum Triangle in Anaheim, CA. The Platinum Triangle area is becoming the most sought after urban center in Orange County; close to restaurants, transportation, jobs, and entertainment (as well as Disneyland).

Jefferson Platinum Triangle is now an upscale, high-end urban living area. In the planning phase, the owner wanted to strive toward a more sustainable outdoor area, where the residents could meet up for social community time. Landscape Architects with Gillespie Moody Patterson (GMP) from San Diego specified Tournesol Siteworks’ products and designed an amazing amenity deck. GMP specified 250 of our Boulevard Structural Wood Tiles along with our Sliding Wood Tile Fasteners to connect the tiles in place.

Our wood tiles, installed by Woodcrest Grading, are 24″ x 24″ and are produced from Boulevard Thermally-Modified Wood.  The wood goes through a process that changes the chemical make-up and cell structure of the wood. The process creates lumber with exceptional resistance to rot, pest, and decay. Technically, it shares a 25-year preserved-wood-like durability level similar to South American hardwoods, but is ecologically-friendly. The thermal-modification process also prevents moisture absorption and makes Boulevard wood resistant to warp, twist and other movement. Over time, weathering will reveal the wood’s natural patina to a silver, grayish color.

Along with our wood tiles, they selected our VersiJack Adjustable Support Pedestals; VersiJack are twist-to-adjust height pedestals, needed to accommodate this project for heights from 1-1/2″ up to 11″. The pedestals create a broad, stable base that can support more weight than any other pedestal system. Due to unevenness and slope of the deck base, they required our Platform Slope Correctors which can correct from 0% to 5% slope at 1% increments. Because this type of corrector sits on top of the pedestal, it is faster and easier to adjust to the correct slope, as well as being less expensive than a bottom slope corrector.

The apartment tenants thoroughly enjoy the amenity deck at Jefferson Platinum Triangle, complete with comfortable outdoor lounges, BBQ grill kitchens and sunning areas.  The project came out beautifully and makes us wish we could enjoy it now.

Custom Thermally-Modified Wood Benches in Cambridge

Email this to someoneShare on FacebookTweet about this on TwitterShare on Google+

Tournesol Siteworks‘ products have been specified as part of the renovation plan for the Sidney Research Campus, named by owner BioMed Realty Trust, in Cambridge, MA. The center is designed for smaller companies in the biotechnology industry, committed to the discovery and development of breakthrough small molecule drugs for serious diseases. The research center comprises three properties, one at 200 Sidney Street in the Fort Washington Research Center which we blogged in April 2016.

Image Today 3-39-14 PM
Sidney Research Campus Entrance

Architects at Arrowstreet Architecture and Design of Boston, collaborated with general contractors from The Richmond Group, out of Hopkinton, MA, on the beautiful building entrance. Arrowstreet designed cool, custom wood benches over cast-in-place concrete and specified Tournesol Siteworks for the custom bench construction. For more info on the original blog, read here.

IMG_0704
Custom Wood Benches Designed by Arrowstreet

At the 40 Erie Street location of the research campus, landscape architects from CBA Landscape Architects out of Cambridge, MA, collaborated with Arrowstreet on custom benches. They specified our Boulevard thermally-modified wood on powder-coated steel furring strips; the dimensions of the Boulevard Wood were custom with varying lengths.

Our Boulevard Wood goes through a process which changes the chemical make-up and cell structure of the wood. The process creates lumber with exceptional resistance to rot, pest, and decay. Technically, it shares a 25-year preserved-wood-like durability level similar to South American hardwoods, but is ecologically-friendly. The thermal-modification process also prevents moisture absorption (which is great for Cambridge’s varying weather) and makes Boulevard wood resistant to warp, twist and other movement.

img_4749
40 Erie Street Custom Wood Benches

The units were assembled completely at the Tournesol Siteworks facility in Union City, and shipped ready to be installed on site. Landscape contractors from Brightview (formerly Valleycrest) of Boston installed the custom benches and they look amazing!

img_4746

 

 

 

 

Our Thermally-Modified Wood in The New York Times

Email this to someoneShare on FacebookTweet about this on TwitterShare on Google+

At the beginning of October, we at Tournesol Siteworks were excited to be selected for a special article in the design section of The New York Times (in print and online), written by Julie Lasky. The article, titled “Architects and Designers Pick Their Favorite New Textiles, Paints and Hardware” featured recent product designs that were selected as favorites by a distinguished group of architects and designers.

Our Boulevard Thermally-Modified Structural Wood Tiles were chosen by Mikyoung Kim, of mikyoung kim design in Boston. She commented that the wood “frees us from using exotic hard woods on our roof decks.” To view the online article, click here.  For a print version of the article see here: tournesol-siteworks-new-york-times-10-6-16.

IMG_0725crop
Tournesol Siteworks’ Boulevard Thermally-Modified Structural Wood Tiles

Thermally-Modified Wood Planters Presentation

Email this to someoneShare on FacebookTweet about this on TwitterShare on Google+

In Concord, CA, the Willows Shopping Center has been receiving a remodel for the past few years. Many architects, contractors, and landscape architects have been called to help beautify specific sections of this sleepy shopping center, and modernize the area for the community of shoppers and diners. One project in particular involved upgrading the exterior of Fuddruckers restaurant. Johnson Lyman Architects, out of Walnut Creek, specified our Boulevard Wood Planters for the front entrance of the restaurant.

fudds

Tournesol Siteworks’ wood planters were installed by Lenzi Incorporated, out of Stockton, and arranged as a decorative barrier along the length of the dining area (shown in the photo below). Each planter is 48″L x 18″W x 36″H and has been beautifully planted with various succulents.

plant-2-small
Thermally-Modified Boulevard Wood Planters

Our wood planters are produced from Boulevard thermally-modified wood which goes through a process that changes the chemical make-up and cell structure of the wood. The process creates lumber with exceptional resistance to rot, pest, and decay. Technically, it shares a 25-year preserved-wood-like durability level similar to South American hardwoods, but is ecologically-friendly.

wood

The thermal-modification process also prevents moisture absorption and makes Boulevard wood resistant to warp, twist and other movement. Over time, weathering will reveal the wood’s natural patina to a silver, grayish color.

planter-1-smaller

As the Willows Shopping Center continues to be remodeled and renovated, we look forward to seeing the outstanding results.

Parklet Project with an Ocean Theme

Email this to someoneShare on FacebookTweet about this on TwitterShare on Google+

Back in July, the Florida ASLA chapter event in Jacksonville, Florida, held a parklet competition for university students. The theme of the competition was the 100-year anniversary celebration of the National Parks Service. Tricia Keffer, Florida International University (FIU) student, reached out to Tournesol Siteworks. She is a student in the Master’s MLA program for Landscape Architecture and expects to graduate in spring 2018. Tricia asked if we would loan her and her team a few of our products to help build a parklet for their competition entry.

Processed with VSCO with a6 preset
Photo courtesy of Tricia Keffer

We were eager to help her team with the competition, since Tournesol Siteworks was exhibiting at the event and this was a good opportunity to present our products within our product loan program. For her team’s parklet, we provided our Thermally-Modified Boulevard Wood Structural Tiles with SpiraPave adjustable deck and paver supports. Our Boulevard Wood (shown in the photo below) goes through a process which changes the chemical make-up and cell structure of the wood. The process creates lumber with exceptional resistance to rot, pest, and decay. Technically, it shares a 25-year preserved-wood-like durability level similar to South American hardwoods, but is ecologically-friendly. The thermal-modification process also prevents moisture absorption and makes Boulevard wood resistant to warp, twist and other movement.

Processed with VSCO with a6 preset
Photo courtesy of Tricia Keffer

Our Harlie Collection planter made of lightweight FRP Fiberglass also provided ambiance for the setting along with our South Chairs, one in a tall seat and one shorter-sized stool. Tricia’s blog about the contest can be found here: http://plantspeoplelove.com/flasla-16-parklet-competition. Kindly, she answered a few question regarding her inspiration and the competition entry.

“My inspiration was the Florida Keys, and the natural beauty of the waterfront areas and the underwater world. So I decided the National Marine Sanctuary would be my park to showcase. One day I passed by a store called “Ocean Gardens” in Islamorada. The name of the store was my design strategy. My idea was for people to experience the plant world that is underwater.”

“I did the planning, the design, and the building part. My fellow students from the student FL ASLA chapter pitched in with the chalk ‘underwater’ drawing on the front, the plants, and tweaking. It took about 2 hours to put it all together on site. It was a fun experience. ”

Photo courtesy of Tricia Keller

“I decided to enter the parklet competition because it was a great opportunity to meet and work with vendors. It was my first Landscape Architect conference and I really enjoyed working with your company. Actually seeing how the products were set up and the look and feel of them is handy for my future designs than just looking online. I think the decking in particular really brought the whole design together. The clean look and feel of the wood set the stage for the seating.”

We’re thrilled to have been part of Tricia’s team build for the parklet competition and, although she wasn’t the winner, we know she had a blast designing the parklet and displaying her skills and talent in landscape architecture. We wish her all the best in her upcoming career.

 

 

Thermally Modified Wood at McMullen Museum of Art

Email this to someoneShare on FacebookTweet about this on TwitterShare on Google+

Have you ever seen a piece of art that stops you in your tracks? Sometimes a peaceful feeling washes over you, or maybe you’re drawn to a memory of another place or experience. Per Pablo Picasso, “Art washes away from the soul the dust of everyday life,” and I tend to agree. Speaking of art, the McMullen Museum of Art at Boston College, houses amazing works of art and also offers distinctive exhibitions, gallery talks and other events which bring the public to the museum.

mcmullen01
McMullen Museum of Art, Boston College

Last fall, the McMullen Museum of Art moved to a new location on the university’s Brighton Campus located in the former residence of Boston’s Cardinal Archbishop. The building, originally designed by Boston architects Maginnis and Walsh, was built in 1927 in the Roman Renaissance Revival Style. Modern architects DiMella Shaffer Associates out of Boston, collaborated with landscape architects from Carol R. Johnson Associates (CRJA) on the redesign.

IMG_0735
Side Balcony

For the remodel, CRJA specified Tournesol Siteworks’ products for a beautiful new 7’W x 20’L balcony and a 1,400 sq.ft amenity deck. Consigli Construction Co., out of Milford, MA, completed the installation. CRJA specified our Boulevard Structural Wood Tiles along with our Sliding Wood Tile Fasteners to connect the tiles in place. The wood tiles are 24″ x 24″ and are produced from Boulevard thermally-modified wood which goes through a process that changes the chemical make-up and cell structure of the wood. The process creates lumber with exceptional resistance to rot, pest, and decay. Technically, it shares a 25-year preserved-wood-like durability level similar to South American hardwoods, but is ecologically-friendly.

The thermal-modification process also prevents moisture absorption (which is great for Boston’s winter weather) and makes Boulevard wood resistant to warp, twist and other movement. Over time, weathering will reveal the wood’s natural patina to a silver, grayish color.

IMG_0733
Amenity Deck

Along with our wood tiles, they selected our VersiJack support pedestals in various sizes. VersiJack are twist-to-adjust height pedestals, needed to accommodate this project for heights from 1-1/2″ up to 11″. The pedestals create a broad, stable base that can support more weight than any other pedestal system. Due to unevenness and slope of the deck base, they required our Platform Slope Correctors which can correct from 0% to 5% slope at 1% increments. Because this type of corrector sits on top of the pedestal, it is faster and easier to adjust to the correct slope, as well as being less expensive than a bottom slope corrector.

IMG_0725crop
VersiJack Adjustable Pedestals

This installation also required our low-raised decking product,  SpiraPave Adjustable Deck & Paver Support Jacks. This raised podium floor allows for rapid drainage, concealed services below, and reduced the installation cost compared to any other material.

We were excited to be part of the McMullen Museum of Art’s historic transformation and relocation – congratulations on their new digs!

Cambridge’s Custom Benches & Planters

Email this to someoneShare on FacebookTweet about this on TwitterShare on Google+

In the heart of Cambridge, MA (formerly Newtowne from 1630-1703), is Kendall Square – an exciting place for the expanding Technology/Biotechnology market. The neighborhood is full of shops, restaurants, and movie theaters rubbing elbows with institutions and corporations including MIT, Google, Amazon, and Twitter, among others. In the heart of Kendall Square is 50 Hampshire Street, holding the largest block of adjacent space in the square. Recently, 50 Hampshire Street underwent a fabulous lobby renovation and new exterior landscape design.

Photo Courtesy of Copley Wolff Design Group

Local firm CBT Architects collaborated with Boston landscape architect Copley Wolff Design Group to create an extraordinary design which included custom made wooden benches and planters. Copley Wolff specified Tournesol Siteworks for the construction of the planters and 20 custom Boulevard thermally-modified wood benches. The benches were fabricated in Tournesol Siteworks‘ Northern California facility and locally installed by landscape contractors  Brightview (formerly Valleycrest) of Boston.

Image Today 3-39-21 PM

The custom dimensions of the Boulevard wood are 72″L x 24″W x 18″H with the wood running the length of both bench sides and tops. Our Boulevard Wood goes through a process which changes the chemical make-up and cell structure of the wood. The process creates lumber with exceptional resistance to rot, pest, and decay. Technically, it shares a 25-year preserved-wood-like durability level similar to South American hardwoods, but is ecologically-friendly. The thermal-modification process also prevents moisture absorption (which is great for Cambridge’s varying weather) and makes Boulevard wood resistant to warp, twist and other movement.

Photo Courtesy of Copley Wolff Design Group

Along with the custom benches, we created 11 custom FRP Fiberglass Wilshire Collection planters in rectangular dimensions of 72″L x 24″W x 36″H, and 2 tall square Wilshire collection planters sized 24″Sq. x 48″H. Copley Wolff required that the planters be anchored to the ground, so they specified the reinforced bottom option and pre-drilled drain holes. A planter with a reinforced bottom contains a strong piece of plywood between layers of the fiberglass on the base, which provides a solid panel to anchor to the ground and spreads the load should the planter move.

All of the planters are outfitted with our CWM Modular Container Irrigation to fit the shape and size of each planter. The CWM system gives the ability to store incredible amounts of water and reduce maintenance.

Photo Courtesy of Copley Wolff Design Group

We’re thrilled to take part in this project, just down the street from the 200 Sidney project. The Boulevard wood is coming to Boston!

 

 

Pre-fabricated Wooden Benches for Cast-in-Place in Cambridge

Email this to someoneShare on FacebookTweet about this on TwitterShare on Google+

Cambridge Massachusetts is famous for being the home of two of the world’s top universities – Harvard University and MIT – and the home of many brilliant minds. However, in the same town, there are other brilliant minds at the Sidney Research Center, at 200 Sidney Street in the Fort Washington Research Center. Currently under renovation, the building was newly rebranded the Sidney Research Campus by  owner BioMed Realty Trust. The space is designed for smaller companies in the biotechnology industry, committed to the discovery and development of breakthrough small molecule drugs for serious diseases.

Image Today 3-39-14 PM

Architects at Arrowstreet Architecture and Design of Boston, collaborated with general contractors from The Richmond Group, out of Hopkinton, MA, on the beautiful building entrance. Arrowstreet designed cool, custom wood benches over cast-in-place concrete and specified Tournesol Siteworks for the custom bench construction.

IMG_0704

New England Finish Systems, based in Salem, NH, installed the Boulevard thermally-modified wood  on powder-coated steel furring strips. Certain benches required backs and others were left backless. The dimensions of the Boulevard Wood were custom, either 2 &1/4″W or 2 & 1/2”W and custom lengths varied. The units were assembled completely at the Tournesol Siteworks facility in Hayward, and shipped ready to be installed on site.

IMG_0712

Our Boulevard Wood goes through a process which changes the chemical make-up and cell structure of the wood. The process creates lumber with exceptional resistance to rot, pest, and decay. Technically, it shares a 25-year preserved-wood-like durability level similar to South American hardwoods, but is ecologically-friendly. The thermal-modification process also prevents moisture absorption (which is great for Cambridge’s varying weather) and makes Boulevard wood resistant to warp, twist and other movement.

IMG_0716

The project turned out beautifully, and seems to be a welcoming and relaxing rest area for the brilliant minds at work inside the building. We are excited to be part of such an amazing structure. Hopefully, those who come outside to rest will be able to work inside to bring good news of hope to those who are suffering and who may benefit from their research.

Fresh, Cool Style at Hotel Zephyr

Email this to someoneShare on FacebookTweet about this on TwitterShare on Google+

San Francisco is a city that is alive, constantly morphing and changing. The breeze from the bay brings the sounds of the waterfront to the courtyard of the Hotel Zephyr, close to Fisherman’s Wharf in San Francisco, CA. The hotel has recently refurbished the exterior decor and has created a uniquely different environment for hotel guests, including a fire pit and a large, 40 foot periscope with views of the water and Alcatraz.

Zephyr 1

Being close to the bay, Jett Landscape Architecture + Design wanted to bring port and shipping elements of the wharf into the Hotel Zephyr project design. Using large segments of metal shipping containers, they created walls surrounding the courtyard of the hotel. Jett Landscape specified Tournesol Siteworks‘ VGM Modular Living Wall System on one wall of the courtyard, which was installed by Eggli Landscape Contractors, out of Redwood City, CA.

Zephyr VGM

The VGM Living Wall system consists of 100% recycled plastic planting modules attached to stainless steel hanging rails. Each planting module, made of 100% recycled polypropylene, has a generous 4” or 8” soil profile. Because root growth isn’t limited to small cells or baffles like in other systems, plants grow healthier and stronger, which means lower maintenance yet more amazing results. Eggli also installed our stabilized Media Block, an organic base material stabilized into a sponge-like block that fits perfectly in the VGM module. The media block absorbs up to five times its weight in water, but only weighs 40 lbs./pcf, facilitating even irrigation, faster grow in and optimal plant health.

Zephyr 5For a rustic effect, they used steel sheet pilings (also used on the waterfront) for decoration in the northeast corner of the courtyard. Inside the pilings, we created custom trapezoid-shaped Welded Planter Liners that are 34″ wide in back, 15″ wide in front, 48″ tall, and 18″ deep. The welded planter liners were inserted into the steel pilings and used as planters.

Zephyr 4

At the front of the stylish Hotel Zephyr, Patrick Lamar from RHI Construction out of Santa Rosa, installed our Boulevard Wood Decking, which compliments the entrance (as shown in the photo below). Our Boulevard thermally-modified wood goes through a process which changes the chemical make-up and cell structure of the wood. The process creates lumber with exceptional resistance to rot, pest, and decay. Technically, it shares a 25-year preserved-wood-like durability level similar to South American hardwoods, but is ecologically-friendly.

The thermal-modification process also prevents moisture absorption (which is great for San Francisco’s wind, rain and bay weather) and makes Boulevard wood resistant to warp, twist and other movement.

Zephyr 3

We are thrilled to have been part of the redesign of Hotel Zephyr and to be part of this cool stylish, trendy installation – right in our own backyard (well, across the bay at least).

Queen Anne’s Playful Uptown Parklet

Email this to someoneShare on FacebookTweet about this on TwitterShare on Google+

Parklets are popping up all over the country, especially in major cities, and are beginning to change the pedestrian environment. These little “mini parks” have allowed the community to build public spaces for meeting, socializing, and as urban oases. Parklets have become really popular due to PARKing Day, a nation-wide celebration day rivaling the automobile-focused environment. It’s a day where the public takes back urban street parking slots and creates temporary parks filled with designers, artists and people seeking community interaction.

Instagram 3-29-16

Two years ago, the city of Seattle was challenged by PARKing Day and recognized its success in other cities such as San Francisco and Los Angeles. Since the city sought to create a number of parklets all over Seattle, the Seattle Department of Transportation (SDOT) announced its Pilot Parklet Program. The program opened an application process for communities and neighborhoods to submit for a parklet to be constructed in their urban area.

Seattle’s VIA Architecture, on behalf of VIA’s Community Design Studio, worked with a civic organization called The Uptown Alliance (which represents the Uptown Urban Center) to submit an application for the Queen Anne district. The “Uptown Parklet” was selected as one of 10 parklets and was fortunate enough to be one of the first constructed as part of the pilot program. Slater Construction, out of Seattle, worked with the team of designers, community volunteers and architects to build this parklet, completed in February 2015.

IMG_8360-1

We revisited this cool parklet this month (March 15), which features Tournesol Siteworks’ Boulevard Wood for the decking, benches and planter cladding. Our Boulevard thermally-modified wood goes through a process which changes the chemical make-up and cell structure of the wood. The process creates lumber with exceptional resistance to rot, pest, and decay. Technically, it shares a 25-year preserved-wood-like durability level similar to South American hardwoods, but is ecologically-friendly.

Weathering reveals the wood’s natural patina to a silver, grayish color (as shown in the photo above). The thermal-modification process also prevents moisture absorption (which is great for Seattle’s occasionally wet weather) and makes Boulevard wood resistant to warp, twist and other movement.

IMG_8362-1

Th Uptown Parklet is the perfect place for our Boulevard wood, with the public interaction, environmental exposure and continual community use. The wood has withstood wonderfully! We’re so glad that the Queen Anne district is enjoying their Uptown Parklet…go Seattle!